Parameter Reference D-123
AC30V series Variable Speed Drive
Voltage Control
Parameters::Motor Control::Voltage Control
Designed for VOLTS/Hz motor Control Mode.
This function allows the motor output volts to be controlled in the presence of dc link voltage variations. This is achieved by controlling the level of
PWM modulation as a function of measured dc link volts. The dc link volts may vary either due to supply variations or regenerative braking by the
motor.
Three control modes are available, None, Fixed and Automatic.
PNO Parameter Descriptions
0371 Terminal Voltage Mode
Selection of voltage control mode
Enumerated Value: Terminal Voltage Mode
0: None
1: Fixed
2: Automatic
0374 Motor Base Volts
Scale of the output voltage
To Next Page
Loading...
