Parameter Reference D-29
AC30V series Variable Speed Drive
Drive info
Setup::Environment
Parameters::Device Manager::Drive info
PNO Parameter Descriptions
0961 Drive Name
A string value that may be used to identify this drive in a system.
1100 Firmware Version
The version of the firmware running in the Control Module.
0951 Boot Version
The version of the boot loader firmware running in the Control Module, presented as a text string.
0687 Boot Version Number
The version of the boot loader firmware running in the Control Module.
0987 Power Stack Required
The rating of the power electronics for the configuration loaded in the drive. If 0987 Power Stack Required is different from 0543
Power Stack Fitted the drive will be prevented from operating normally until the configuration is corrected.
0543 Power Stack Fitted
The rating of the power stack that the Control Module is fitted to. When the Control Module not attached to a stack this parameter is
not visible and is ignored.
0695 Attached to Stack
A Boolean parameter that indicates that the Control Module is attached to a power stack. When the Control Module is not attached to
a stack but is powered using the auxiliary 24v input this parameter will indicate FALSE.
1109 Stack Pcode
The product code string that may be used to order an equivalent Power Stack.
1258 Stack Serial No
The serial number of the Power Control Card, (part of the Power Stack assembly).
1116 Control Module Pcode
The product code string that may be used to order an equivalent Control Module, excluding options.
0977 Control Module Serial
The serial number of the Control Module.
To Next Page
Loading...
