Parker AC30 series User Manual

Setup Wizard 9-21
AC30V series Variable Speed Drive
SETUP THE DRIVE CONTROL
Figure 9-12 Drive Control setup
The “Control” page allows configuration of the Drive control. The basic control parameters are shown on the left hand side. Expand the
“Advanced” dropdown to see more advanced parameters. The exact parameters show will depend on the motor type previously selected.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485