Parker AC30 series User Manual

9-20 Setup Wizard
AC30V series Variable Speed Drive
Figure 9-11 Custom Motor configuration
Custom Motor
Custom motor data is entered in this page. The page is split into two parts. On the top are “Basic” motor parameters and below are more
advanced ones. Nominal defaults will have been set, depending on the size of AC30V Drive being configured. The Engineer should adjust these
default values with data from the motor nameplate or technical specification.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485