D-94 Parameter Reference
AC30V series Variable Speed Drive
Runtime Statistics
Parameters::Device Manager::Runtime Statistics
Functional Description
The Runtime Statistics group of parameters indicate the working age of the drive. The Control Board Up Time value is used as a reference when
recording the time at which a trip occurs. Similarly, the HV SMPS Up Time is used as a reference when recording the time at which a disabled trip
event occurs when the drive is operating in Fire Mode, (see Chapter 13: Fire Mode,
on page D-118 and HA502134U002 “Fan Control Application” manual).
PNO Parameter Descriptions
1139 Control Board Up Time
The time in seconds for which the control board has been powered, either by 24v or from the 3-phase supply.
1252 HV SMPS Up Time
The time in seconds for which the drive has been powered from the 3-phase supply.
1406 HV Power On Count
The number of times that the drive has been powered up from the 3-phase supply
1407 Motor Run Time
The time in seconds for which the drive has been controlling a motor
To Next Page
Loading...
