Parker AC30 series User Manual

D-50 Parameter Reference
AC30V series Variable Speed Drive
Induction Motor Data
Setup::Motor Control::Induction Motor Data
Parameters::Motor Control::Induction Motor Data
Only available if IM MOTOR selected in Control Mode
PNO Parameter Descriptions
0568 Magnetising Current
The no load current of the induction motor, defined as rotor flux / magnetising inductance, usually given the title "imr".
0569 Rotor Time Constant
Induction Motor rotor time constant.
0570 Leakage Inductance
Induction motor leakage inductance. Displayed as star or delta equivalent value according to "Per Phase Parameters" setting.
0571 Stator Resistance
Induction motor stator resistance. Displayed as star or delta equivalent value according to "Per Phase Parameters" setting.
0572 Mutual Inductance
Induction motor mutual inductance. Displayed as star or delta equivalent value according to "Per Phase Parameters" setting.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485