12-6 Ethernet
AC30V series Variable Speed Drive
Web (HTTP) Server
The AC30 has a built-in web server. To access the web server the parameter 0944 Web Access must be set to LIMITED or FULL.
To access the AC30 drive, enter the IP address into a web browser. The following browsers are suitable:
• Internet Explorer 8 or above - recommended
• Mozilla Firefox 13 or above
• Google Chrome 19 or above
WEB PAGES
A number of built-in web pages can be accessed from the AC30.
Home Page
The home page displays a summary of the drive.
Parameters Page
The parameters page provides access to the AC30 drive parameters similar to the GKP. This page may only be accessed when the parameter
0944 Web Access is set to FULL. The view level of the parameters may be modified using the parameter 0945 Web View Level.
Parameters may be modified from this web page. If a parameter is successfully modified, and supports save, it will be saved.
Some parameters may only be modified when in configuration mode, in which case the parameter number will be highlighted orange.
Some parameters may only be modified when the drive is stopped, in which case the parameter number will be highlighted purple.
It is recommended to use the refresh button provided on the page, rather than on the browser itself, to view the latest parameter values.
Read-only (diagnostic) parameters may be continuously monitored by clicking on the “monitoring” button on the parameter menu navigation bar.
To Next Page
Loading...
Need help?
General
