Parker AC30 series User Manual

D-122 Parameter Reference
AC30V series Variable Speed Drive
VDC Ripple
Parameters::Trips::VDC Ripple
This function contains parameters and data associated to the VDC ripple detection and trip condition
PNO Parameter Descriptions
0912 VDC Ripple Filter TC
Time constant of the First order Low pass filter applied to the raw VDC Ripple
0915 VDC Ripple Trip Hyst
Hysteresis on the VDC ripple level for trip condition.
0916 VDC Ripple Sample
Time Windows for peak to peak VDC voltage capture and ripple calculation
0913 Max VDC Ripple
Voltage ripple trigger value associated to the VDC ripple trip
0914 VDC Ripple Trip Delay
Delay to trip if trip condition detected
0907 VDC Ripple Level
Actual raw VDC ripple level
0918 Filtered VDC Ripple
Actual filtered VDC ripple level
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485