Parker AC30 series User Manual

Parameter Reference D-23
AC30V series Variable Speed Drive
Current Loop
Setup:: Motor Control::Control & Type:: Motor Type
Parameters::Motor Control::Control Loop
PNO Parameter Descriptions
0955 Enable Predct Term
To enable the predictive term of the current loop.
Functional Description
This is to add the predictive term into the voltage demand formulated by the current regulator so to to increase the dynamic performance of
motor drive. It is recommented to enable this parameter if the permanent magnet motor is used
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485