Introduction 2-1
AC30V series Variable Speed Drive
Chapter 2: Introduction
About this Manual
Motors used must be suitable for Inverter duty. IMPORTANT
NOTE Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor motor control or Autotune
problems may occur if you do.
This manual is intended for use by the installer, user and programmer of the AC30V drive. It assumes a reasonable level of understanding in
these three disciplines.
NOTE Please read all Safety information before proceeding with the installation and operation of this unit.
It is important that you pass this manual on to any new user of this unit.
HOW THE MANUAL IS ORGANISED
This Engineering Reference manual is organised into chapters, indicated by the numbering on the edge of each page. If the manual is to be
printed it is designed so that it should be printed double-sided using the short-edge for binding.
Information for all AC30V units is included (frames D, E, F, G, H & J).
Parker Hannifin Manufacturing Limited is referred to as “Parker” throughout the manual.
The manual is more detailed than the relevant QuickStart manual, and so is of use to the unfamiliar as well as the high-end user.
To Next Page
Loading...
Need help?
General
