B-3 Sequencing Logic
AC30V series Variable Speed Drive
The OPERATION ENABLED state is the normal operation state of the Drive. In this state the Reference Ramp is active, generating a Speed
Demand. Sub-states and allowed transitions are shown below. Note – the RUNNING sub-state also includes JOGGING.
STATE TRANSITIONS
State transitions are caused by internal events in the Drive or external commands via the Control Word. The transition numbers below relate to
those on the Sequence Diagram.
Transition 0: No Power to NOT READY TO SWITCH ON
Power has been applied to the control electronics of the drive.
To Next Page
Loading...
