Parker AC30 series User Manual

D-32 Parameter Reference
AC30V series Variable Speed Drive
Energy Meter
Monitor::Energy Meter
Parameters::Motor Control::Energy Meter
This feature measures the electrical energy used by the motor.
PNO Parameter Descriptions
0380 Power kW
This diagnostic shows the power being delivered to the load in kilowatts.
0381 Power HP
This diagnostic shows the power being delivered to the load in horsepower.
0382 Reactive Power
This diagnostic shows the reactive power being delivered to the load in kilo volt-amperes reactive.
0383 Energy kWh
This diagnostic shows the total energy consumed by the load in kilowatt hours.
0385 Power Factor Est
This diagnostic shows the power factor estimate (between 0 and 1).
0386 Power Factor Angle Est
This diagnostic shows the power factor angle estimate.
0389 Reset Energy Meter
When Reset Energy Meter is set to TRUE, the Energy KWh parameter is reset to zero automatically when the maximum value is
reached.
When Reset Energy Meter is set to FALSE, the Energy KWh parameter is held at the maximum value when the maximum value
has been reached
Changing this from FALSE to TRUE at anytime will cause the Energy KWh parameter to be reset to zero.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485