Parker AC30 series User Manual

1-4 Safety
AC30V series Variable Speed Drive
CAUTION!
APPLICATION RISK
• The specifications, processes and circuitry described herein are for guidance only and may need to be adapted to the user’s
specific application. We can not guarantee the suitability of the equipment described in this Manual for individual applications.
RISK ASSESSMENT
Under fault conditions, power loss or unintended operating conditions, the drive may not operate as intended. In particular:
• Stored energy might not discharge to safe
levels as quickly as suggested, and can still
be present even though the drive appears to
be switched off
• The motor's direction of rotation might not be controlled
• The motor speed might not be controlled
• The motor might be energised
A drive is a component within a drive system that may influence its operation or effects under a fault condition. Consideration must
be given to:
• Stored energy • Supply disconnects • Sequencing logic • Unintended operation
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485