Parker AC30 series User Manual

D-20 Parameter Reference
AC30V series Variable Speed Drive
The selection of control strategy comes next, with the permitted settings as follows:
- Induction motors can be run in either volts hertz mode or vector mode
- Permanent magnet motors can only be run in vector control mode
If an induction motor is selected, vector control is selected, and an encoder option is fitted, it is then necessary to choose whether to select vector
control with encoder feedback for improved performance.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485