Parker AC30 series User Manual

AC30 User’s Manual
Frames D, E, F, G, H & J
HA501718U002 Issue 4
Compatible with Firmware Version 1.8 onwards
2012 © Parker Hannin Manufacturing Limited.
All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in any form
or by any means to persons not employed by a Parker Hannin Manufacturing Limited company without written
permission from Parker Hannin Manufacturing Ltd. Although evry efford has been taken to ensure the accuracy
of this document it may be necessary, without notice, to make amendments or corect omissions Parker Hannin
Manufacturing Limited cannot accept responsibility for damage, injury, or expenses resulting thereform.
WARRANTY
The general terms and conditions of sale of goods and/or services of Parker Hannin Europe Sàrl, Luxembourg,
Switzerland Branch, Etoy, apply to this contract unless otherwise agreed. The terms and conditions are available
on our website: www.parker.com/termsandconditons/switzerland
Parker Hannin Manufacturing Limited reserved the right to change the content and product specication without
notice.
www.comoso.com

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485