_____________________________________________________________________________
LB9 User’s Guide 1460/1523
11.8.6.5 Viewing IGMP Routing Interface Source List Information
Selection Criteria
Multicast Group IP - Select the IP multicast group address for which data is to be displayed. If no
group membership reports have been received on the selected interface you cannot make this
selection, and none of the data on this page displays.
Interface - Select the interface for which data is to be displayed.
Non-Configurable Data
Group Compatibility Mode - This parameter shows group compatibility mode (v1, v2 and v3) for
this group on the specified interface.
Source Filter Mode - The source filter mode (Include/Exclude/NA) for the specified group on this
interface. When NA mode is active the field is blank.
Source Hosts - The source addresses which are members of this multicast address.
Expiry Time - The expiry time interval (in hh:mm:ss) against each source address which are
members of this multicast group. This is the Length of time after which the specified source entry is
aged out.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General