_____________________________________________________________________________
LB9 User’s Guide 1482/1523
Last Member Query Interval - This value indicates the configured Last Member Query Interval(in
milli-seconds) inserted into Group-Specific Queries sent in response to Leave Group messages.
Last Member Query Count - This value indicates the configured number of Group-Specific Queries
sent before the router assumes that there are no local members.
Interface Statistics
Querier Status - This value indicates whether the interface is a MLD querier or non-querier on the
subnet it is associated with.
Querier Address - The address of the MLD querier on the IP subnet to which the selected interface
is attached.
Querier Up Time - The time in seconds since the MLD interface querier was last changed.
Querier Expiry Time - The time in seconds remaining before the other querier present timer
expires. If the local system is the querier, this will be zero.
Wrong Version Queries Received - Indicates the number of queries received whose MLD version
does not match the MLD version of the interface.
Number of Joins Received - The number of times a group membership has been added on this
interface.
Number of Groups - The current number of membership entries for the selected interface in the
cache table.
Common Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
To Next Page
Loading...
Need help?
General