_____________________________________________________________________________
LB9 User’s Guide 333/1523
6.8.1.18 show captive-portal configuration <cp-id> interface [interface]
This command displays information for all interfaces assigned to a captive portal configuration or a
specific interface assigned to a captive portal configuration.
Default Setting
None
Command Mode
Privileged Exec
Display Message
CP ID: Shows the captive portal ID.
CP Name: Shows the captive portal name.
Interface: Valid slot and port number separated by a forward slash.
Interface Description: Describes the interface.
Operational Status: Shows whether the captive portal is enabled or disabled.
Block Status: Shows the blocked status, which is Blocked or Not Blocked.
If you include the optional slot/port information, the following additional information appears:
Disable Reason: If the captive portal is disabled, this field indicates the reason.
Authenticated Users: Shows the number of authenticated users connected to the network through
this captive portal.
To Next Page
Loading...