_____________________________________________________________________________
LB9 User’s Guide 339/1523
6.8.1.25 show captive-portal trapflags
This command shows which captive portal SNMP traps are enabled.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Client Authentication Failure Traps: Shows whether the SNMP agent sends a trap when a client
attempts to authenticate with a captive portal but is unsuccessful.
Client Connection Traps: Shows whether the SNMP agent sends a trap when a client
authenticates with and connects to a captive portal.
Client Database Full Traps: Shows whether the SNMP agent sends a trap each time an entry
cannot be added to the client database because it is full.
Client Disconnection Traps: Shows whether the SNMP agent sends a trap when a client
disconnects from a captive portal.
To Next Page
Loading...