Quanta Computer T5016-LB8D - Page 828

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 828/1523
8.5.2.8 ip pim
This command administratively enables PIM on an interface or range of interfaces.
Syntax
ip pim
no ip pim
no - This command sets the administrative mode of PIM on an interface to disabled.
Default Setting
Disabled
Command Mode
Interface Config
8.5.2.9 ip pim bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received through an
interface or range of interfaces.
Syntax
ip pim bsr-border
no ip pim bsr-border
no - Use this command to disable the interface from being the BSR border.
Default Setting
Disabled
Command Mode
Interface Config
i
This command takes effect only when PIM-SM is configured as the PIM mode