R&S ESR Series User Manual

Receiver Mode
R&S
®
ESR
199User Manual 1175.7068.02 ─ 12
with a special option, model or (measurement) mode, this information is provided in the
corresponding softkey description.
Trace 1 - 6...................................................................................................................199
More Traces................................................................................................................ 199
Copy Trace..................................................................................................................199
Trace Wizard...............................................................................................................199
ASCII Trace Export..................................................................................................... 199
Decim Sep...................................................................................................................200
Trace 1 - 6
Opens a submenu to select the trace mode and detector (for both scan and final mea-
surement).
For more information see Chapter 5.2.2, "Detectors", on page 167 and Chapter 5.2.3,
"Trace Modes", on page 171.
Note: When you select detector type "None" for the final measurement, the R&S ESR
ignores peaks found on the corresponding trace during the final measurement.
Remote command:
Selecting the trace mode:
DISPlay[:WINDow<n>]:TRACe<t>:MODE on page 683
Selecting the detector for the scan:
[SENSe:][WINDow:]DETector<trace>[:FUNCtion] on page 853
Selecting the detector for the final measurement:
[SENSe:]DETector<t>:FMEasurement on page 642
More Traces
Opens a submenu to select one of the traces not currently displayed in the main menu.
Copy Trace
Opens an edit dialog box to enter the number of the trace memory in which the cur-
rently selected trace will be copied.
Remote command:
TRACe<n>:COPY on page 854
Trace Wizard
Opens the "Trace Wizard" dialog box.
For more information see Chapter 5.3.7.5, "Trace / Final Meas", on page 195.
ASCII Trace Export
Opens the "ASCII Trace Export Name" dialog box and saves the active trace in ASCII
format to the specified file and directory.
Tip: You can export a single trace ("ASCII Trace Export Trace (x)" softkey) or all traces
at the same time ("ASCII Trace Export All Traces"). When you use single trace export,
the R&S ESR exports the currently selected trace (indicated by the softkey label). Note
that the exported ASCII file has a slightly different structure compared to a single trace
export.
Common Analysis Functions

R&S ESR Series Specifications

General

Brand	R&S
Model	ESR Series
Category	Receiver
Language	English