Spectrum Measurements
R&S
®
ESR
264User Manual 1175.7068.02 ─ 12
List Evaluation (On/Off) ← List Evaluation ← Spectrum Emission Mask
Activates or deactivates the list evaluation.
Remote command:
Turning list evaluation on and off:
CALCulate<n>:PEAKsearch|PSEarch:AUTO on page 758
Querying list evaluation results:
TRACe<n>:DATA on page 726
Margin ← List Evaluation ← Spectrum Emission Mask
Opens an edit dialog box to enter the margin used for the limit check/peak search.
Remote command:
CALCulate<n>:PEAKsearch|PSEarch:MARGin on page 680
Show Peaks ← List Evaluation ← Spectrum Emission Mask
In the diagram, marks all peaks with blue squares that have been listed during an
active list evaluation.
Remote command:
CALCulate<n>:ESPectrum:PSEarch|:PEAKsearch:PSHow on page 778
Save Evaluation List ← List Evaluation ← Spectrum Emission Mask
Opens the "ASCII File Export Name" dialog box to save the result in ASCII format to a
specified file and directory. For further details refer also to the "ASCII File Export" soft-
key ("ASCII File Export" on page 264).
Remote command:
MMEMory:STORe<n>:LIST on page 777
ASCII File Export ← Save Evaluation List ← List Evaluation ← Spectrum Emis-
sion Mask
Opens the "ASCII File Export Name" dialog box and saves the active peak list in ASCII
format to the specified file and directory.
The file consists of the header containing important scaling parameters and a data sec-
tion containing the marker data. For details on an ASCII file see Chapter 6.3.1.6,
"ASCII File Export Format", on page 399.
This format can be processed by spreadsheet calculation programs, e.g. MS-Excel. It
is necessary to define ';' as a separator for the data import. Different language versions
of evaluation programs may require a different handling of the decimal point. It is there-
fore possible to select between separators '.' (decimal point) and ',' (comma) using the
"Decim Sep" softkey (see "Decim Sep" on page 200).
An example of an output file for Spectrum Emission Mask measurements is given in
"ASCII File Export Format (Spectrum Emission Mask)" on page 280.
Remote command:
FORMat:DEXPort:DSEParator on page 850
MMEMory:STORe<n>:LIST on page 777
Measurements