INTRODUCTION
INTRODUCTION
GENERAL INFORMATION
This VEHICLE SHOP MANUAL covers the following BRP made SEA-DOO
®
2005 watercraft models. It
should be used in conjunction with the 717/787 RFI ENGINE SHOP MANUAL.
MODEL COLOR ENGINE TYPE MODEL NUMBER
3D Yellow 787 RFI 195A, 195B
3D Premium Red 787 RFI 205E, 205F
3D Premium Yellow 787 RFI 205A, 205B
GTI
Yellow 717 105A, 105B
GTI RFI Yellow 787 RFI 125A, 125B
GTI RFI LE
Yellow 787 RFI 135A, 135B
The use of RIGHT (starboard) and LEFT (port) indi-
cations in the text, always refers to driving position
(when sitting on watercraft).
Besides, in the marine industry, FRONT is called
BOW and REAR is called STERN.
F01L45B
1
2
1. Left (port)
2. Right (starboard)
The information and component/system descrip-
tions contained in this manual are correct at time
of writing. BRP however, maintains a policy of
continuous improvement of its products without
imposing upon itself any obligation to install them
on products previously manufactured.
BRP reserves the right at any time to discontinue
or change specifications, designs, features, mod-
els or equipment without incurring obligation.
CAUTION: These watercraft are designed with
parts dimensioned mostly in the metric sys-
tem. However some components may be from
the imperial system. When replacing fasten-
ers, make sure to use only those recommended
by BRP.
This VEHICLE SHOP MANUAL uses technical
terms which may be slightly different from the
ones used in the Parts Catalog.
When ordering parts always refer to the specific
model PARTS CATALOGS.
Hull Identification Number (H.I.N.)
The Hull Identification Number is composed of 12
digits:
A B C 1 2 3 4 5 L 4 9 5
Model year
Serial
number*
Month of production
Year of production
*
A letter may also be used as a digit.
Manufacturer identification code
smr05-002-001_aen
smr2005-041 IX
To Next Page
Loading...
Need help?
General
