Section 09 PROPULSION
Subsection 04 (VARIABLE TRIM SYSTEM)
ASSEMBLY
Adjustment Screw
Assembly is essentially the reverse of disassem-
bly procedures. Refer to the main illustration at
the beginning of this subsection as a guideline and
for torque specification.
INSTALLATION
The installation is the reverse of the removal pro-
cedure.
Trim Ring
During trim ring installation, apply Loctite 243
(blue) (P/N 293 800 060) on socket screw threads.
Torque socket screws no. 12 to 24 N•m(18lbf•ft).
Adjustment Screw
Torque screws no. 2 to 10 N•m(89lbf•in).
276 smr2005-065
To Next Page
Loading...
