Shihlin electric SE3 Series User Manual

Protection parameter group06
PARAMETER DESCRIPTION 164
Parameter
Name
Default
Setting Range
Content
06-59
P.755
Temperature rising accumulation
rate during E1 alarm
Read only
Read only
---
06-60
P.756
PN voltage during E1 alarm
Read only
Read only
---
06-61
P.757
Total inverter operation time during
E1 alarm
Read only
Read only
---
06-62
P.758
Inverter operation status code
during E1 alarm
Read only
Read only
---
06-63
P.759
E1 alarm date (years / months)
Read only
Read only
---
06-64
P.760
E1 alarm date (days/hours)
Read only
Read only
---
06-65
P.761
E1 alarm date (minutes / seconds)
Read only
Read only
---
Note: If PU302 is used, these functions will not work: Set 06-63(P.759) ~06-65(P.761) to display years/months,
days/hours, minutes/seconds when alarm occurs.
5.7.23 The second alarm message (E2)
 It can record details of the second failure and analyze whether there is any abnormal condition in inverter.
Parameter
Name
Default
Setting Range
Content
06-70
P.766
Output frequency during E2 alarm
Read only
Read only
---
06-71
P.767
Output current during E2 alarm
Read only
Read only
---
06-72
P.768
Output voltage during E2 alarm
Read only
Read only
---
06-73
P.769
Temperature rising accumulation
rate during E2 alarm
Read only
Read only
---
06-74
P.770
PN voltage during E2 alarm
Read only
Read only
---
06-75
P.771
Total inverter operation time
during E2 alarm
Read only
Read only
---
06-76
P.772
Inverter operation status code
during E2 alarm
Read only
Read only
---
06-77
P.773
E2 alarm date (years / months)
Read only
Read only
---
06-78
P.774
E2 alarm date (days/hours)
Read only
Read only
---
06-79
P.775
E2 alarm date (minutes /
seconds)
Read only
Read only
---
Note: If PU302 is used, these functions will not work: Set 06-77(P.773)~06-79(P.775) to display years/months,
days/hours, minutes/seconds when alarm occurs.

Shihlin electric SE3 Series Specifications

General

Brand	Shihlin electric
Model	SE3 Series
Category	Inverter
Language	English