Shihlin electric SE3 Series User Manual

Protection parameter group06
PARAMETER DESCRIPTION 163
Note: If PU302 is used, these functions will not work: 06-42(P.290) =8, 9, 10. Select 06-43 (P.291) to display
years/months, days/hours, minutes/seconds when alarm occurs.
5.7.21 Alarm code query
 Used to monitor latest 12 alarm codes.
Parameter
Name
Default
Setting Range
Content
06-44
P.740
The first (the latest) alarm code E1
Read only
Read only
---
06-45
P.741
The second alarm code E2
Read only
Read only
---
06-46
P.742
The third alarm code E3
Read only
Read only
---
06-47
P.743
The fourth alarm code E4
Read only
Read only
---
06-48
P.744
The fifth alarm code E5
Read only
Read only
---
06-49
P.745
The sixth alarm code E6
Read only
Read only
---
06-50
P.746
The seventh alarm code E7
Read only
Read only
---
06-51
P.747
The eighth alarm code E8
Read only
Read only
---
06-52
P.748
The ninth alarm code E9
Read only
Read only
---
06-53
P.749
The tenth alarm code E10
Read only
Read only
---
06-54
P.750
The eleventh alarm code E11
Read only
Read only
---
06-55
P.751
The twelve alarm code E12
Read only
Read only
---
Alarm code
 For the alarm corresponded alarm code, please refer to Section 5.7.20
5.7.22 Latest alarm message (E1)
 It can record details of the latest failure and analyze whether there is any abnormal condition in inverter.
Parameter
Name
Default
Setting Range
Content
06-56
P.752
Output frequency during E1
alarm
Read only
Read only
---
06-57
P.753
Output current during E1
alarm
Read only
Read only
---
06-58
P.754
Output voltage during E1
alarm
Read only
Read only
---
Setting

Shihlin electric SE3 Series Specifications

General

Brand	Shihlin electric
Model	SE3 Series
Category	Inverter
Language	English