Technical Data
11.1 General Device Data 1095
11.2 Protection Interface and Protection Topology 1104
11.3 Date and Time Synchronization 1106
11.4 Automatic Reclosing 1107
11.5 Phasor Measurement Unit 1108
11.6 Circuit-Breaker Wear Monitoring 1109
11.7 External Trip Initiation 1110
11.8 Overcurrent Protection, Phases 1111
11.9 Overcurrent Protection, Ground 1123
11.10 Directional Time-Overcurrent Protection, Phases 1133
11.11 Directional Time-Overcurrent Protection, Ground 1136
11.12 Inrush-Current Detection 1141
11.13 Instantaneous High-Current Tripping 1142
11.14 Stage with Definite-Time Characteristic Curve 1143
11.15 Stage with Inverse-Time Characteristic Curve 1145
11.16 Voltage-Dependent Overcurrent Protection, Phases 1147
11.17 Overvoltage Protection with 3-Phase Voltage 1150
11.18 Overvoltage Protection with Positive-Sequence Voltage 1152
11.19 Overvoltage Protection with Any Voltage 1153
11.20 Undervoltage Protection with 3-Phase Voltage 1155
11.21 Undervoltage Protection with Any Voltage 1158
11.22 Overfrequency Protection 1159
11.23 Underfrequency Protection 1160
11.24 Underfrequency Load Shedding 1161
11.25 Rate of Frequency Change Protection 1163
11.26 3-Phase Power Protection (P,Q) 1165
11.27 Instantaneous Tripping at Switch onto Fault 1166
11.28 Circuit-Breaker Failure Protection 1167
11.29 Negative-Sequence Protection with Definite-Time Characteristic Curve 1169
11.30 Stage with Inverse-Time Characteristic Curve 1170
11.31 Thermal Overload Protection, 3-Phase – Advanced 1172
11.32 Temperature Supervision 1175
11.33 Analog-Units Function Group 1176
11.34 Synchronization Function 1177
11
SIPROTEC 5, High-Voltage Bay Controller, Manual 1093
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
