Information Lists
For the function groups, functions, and function blocks, settings and miscellaneous signals are defined that
are shown in the settings and information lists.
The information lists summarize the signals. The data type of the information may differ. Possible data types
are ENS, ACD, ACT, SPS and MV, etc.
A type is assigned to the individual data types. The following table shows the possible types:
Type Meaning
I Input – input signal
O Output – output signal
C Controllable – control signal
EXAMPLE:
The following table shows the types for some data types as examples:
Data Type Type
ENS O
ACD O
ACT O
SPS I or O
SPC C
MV O
2.5
Basic Structure of the Function
2.5 Information Lists
SIPROTEC 5, High-Voltage Bay Controller, Manual 45
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
