EasyManua.ls Logo

Siemens 6MD86 - Settings

Siemens 6MD86
1256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 3-21 Description of Diagnostic Data of the COM Interface (Internal COM Link Interface Between
Module and Mainboard)
Protection Interfaces - Log
Type
Name Values Description - COM Interface
Layer Diagnostic Informa-
tion
(Internal COM Link Inter-
face in Mainboard Direc-
tion)
COM interface RXHPFramesOK Number of corresponding
frames (16 bit counter)
Incoming telegrams, high
priority, OK
COM interface RXLPFramesOK Number of corresponding
frames (16 bit counter)
Incoming telegrams, low
priority, OK
COM interface RXHPFramesERR Number of corresponding
frames (16 bit counter)
Incoming telegrams, high
priority, faulty
COM interface RXLPFramesERR Number of corresponding
frames (16 bit counter)
Incoming telegrams, low
priority, faulty
COM interface TXHPFramesOK Number of corresponding
frames (16 bit counter)
Sending telegrams, high
priority, OK
COM interface TXLPFramesOK Number of corresponding
frames (16 bit counter)
Sending telegrams, low
priority, OK
COM interface TXHPFramesERR Number of corresponding
frames (16 bit counter)
Sending telegrams, high
priority, faulty
COM interface TXLPFramesERR Number of corresponding
frames (16 bit counter)
Sending telegrams, low
priority, faulty
COM interface Bridge Details Sub-nodes Sub-nodes Siemens-internal special
diagnostic for fault search
Table 3-22 Description of Diagnostic Data of some Setting Values of the Protection Interface
Protection Interfaces - Log
Type
Name Values Description - Protection
Interface Setting Values
Settings
Connection via
Integer number - display of
the internal coding of the
settings variant
Protection interface is
Connection via
Settings
PDI bandwidth
Bit-rate display Bit rate (bit/s) for protection
telegrams based on the
parameter Connection
via
Settings
PDI Telegram.Overhead
Display of bits Overhead for every protec-
tion telegram in bit.
Settings
Addr.
Parameter C Setting Options Default Setting
Device combin.
_:5131:102 Device combin.:Address of
device 1
1 to 65534 101
_:5131:103 Device combin.:Address of
device 2
1 to 65534 102
_:5131:104 Device combin.:Address of
device 3
1 to 65534 103
_:5131:105 Device combin.:Address of
device 4
1 to 65534 104
3.5.2.10
System Functions
3.5 Protection Communication
126 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017

Table of Contents

Other manuals for Siemens 6MD86

Related product manuals