Figure 3-22
Deleting the Operational Log on the On-Site Operation Panel
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
•
The option to delete the entire log is offered to you in the footer of the display at the bottom left. Use the
softkeys below under the display to activate the command prompts. Confirm the request to Delete.
•
After being prompted, enter the password and confirm with Enter.
•
After being prompted, confirm the Deletion of all entries with Ok.
Deleting Logs from the PC with DIGSI 5
•
To reach the selected log of your SIPROTEC 5 device, use the project-tree window (for example, opera-
tional log).
Project → Device → Process data → Logs → Operational log
Spontaneous Indication Display in DIGSI 5
With DIGSI 5 you have the possibility of displaying all currently transmitted indications of the selected device
in a special indication window.
Procedure
•
Call up the spontaneous indications of your selected device in the navigation window under Online
access.
•
Click Indications in the path:
Online access → Interface → Device → Indications
•
The raising indications appear immediately without you having to wait for a cyclical update or initiate the
manual update.
3.1.7
System Functions
3.1 Indications
SIPROTEC 5, High-Voltage Bay Controller, Manual 69
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
