[scconfig-181013-01, 2, en_US]
Figure 3-56
Protection Interface Initialization and Configuration
Changes in 1 channel are always visible on the other channel as well. All further parameters can be set sepa-
rately for individual channels.
Setting Device-Combination Settings
•
Default setting (_:5131:102) Address of device 1 = 101
•
Default setting (_:5131:103) Address of device 2 = 102
•
Default setting (_:5131:104) Address of device 3 = 103
•
Default setting (_:5131:105) Address of device 4 = 104
•
Default setting (_:5131:106) Address of device 5 = 105
•
Default setting (_:5131:107) Address of device 6 = 106
System Functions
3.5 Protection Communication
110 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
