ANSI Function Abbr.
Points
Template 1
Template 2
Template 3
59 Overvoltage protection, positive-sequence
system
V1>
5
59 Overvoltage protection, 3-phase, universal,
Vx
Vx> 5
74TC Trip-circuit supervision 0
79 Automatic reclosing AREC 45 x
81O Overfrequency protection f> 5
81U Underfrequency protection f< 5
Underfrequency Load Shedding 15
81R Frequency-change protection df/dt 5
86 Lockout 0
90V Two-winding transformer voltage controller 150
90V Three-winding transformer voltage
controller
200
90V Grid coupling transformer voltage
controller
175
PMU Phasor measurement unit PMU 40
Circuit-breaker supervision
∑Ix, I
2
t, 2P, Make
time
10
SOTF Instantaneous tripping at switch onto fault SOTF 0
Arc protection 0 x
Signaling-voltage supervision 0 x
External synchronization 0 x
External 1-of-n check 0
CFC arithmetic 0
Switching sequence 0 x
Inrush-current detection 0
External trip initiation 0
Control 0 x x x
Fault recording of analog and binary signals 0
Supervision and monitoring 0 x x x
Protection interface, serial 0
Circuit breaker 0 1 2 1
Circuit-breaker control 0 1
Circuit-breaker status 0 2
Disconnector/grounding conductor 0 3 16 7
Disconnector/grounding conductor status 0 2 11
Function points: 0 0 60
Application Template: 6MD86 Unconfigured
The unconfigured application template is available for all applications that cannot be built on other application
templates or for which deletion would be too complex.
Applications
4.3 Application Templates and Functional Scope for Device 6MD86
SIPROTEC 5, High-Voltage Bay Controller, Manual 179
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
