[scautcp2-220114-01-DE, 1, en_US]
Figure 5-88 SUP Ethernet Protocol Activation
This protocol is also available for Port J of the integrated Ethernet interface of the base module (refer to
following figure).
[scautcp3-220114-01-DE, 1, en_US]
Figure 5-89 SUP Ethernet Protocol Activation (base module)
With the selection of the SUP protocol for the RTD unit, DIGSI automatically adds the Analog units function
group and the RTD unit Ether. function to your device configuration (refer to the following figure).
Function-Group Types
5.7 Function-Group Type Analog Units
290 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
