2-Pole Triggering
[dw2polan-020211-01.tif, 1, en_US]
Figure 6-12 2-Pole Triggering
[scrang1pLS13p, 1, en_US]
Figure 6-13
2-Pole Triggering, Routing in DIGSI
Connection Variant: 1-Pole Circuit Breaker
The 1-pole circuit breaker is used for separate activation and acquisition of the individual poles of a circuit
breaker. It is intended for common use by 1-pole working protection and control functions.
NOTE
The wiring of the Circuit-breaker function group with binary inputs and binary outputs occurs once per
device .
The control function in this type switches all 3 poles on or off simultaneously.
Control Functions
6.2 Switching Devices
SIPROTEC 5, High-Voltage Bay Controller, Manual 317
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
