measuring point(s) and the corresponding measurands have to be used by which function within the function
group.
The user can change the assignment as needed, that is, function groups can be assigned to any available
measuring points of the device.
To check or change the assignment of measuring points to the function groups, double-click Function-group
connections in the DIGSI 5 project tree.
[scprnavi-270514-01_DE, 1, en_US]
Figure 2-1 Project Tree in DIGSI 5 (Detail)
The window for routing of the measuring points opens in the working area (see the following Figure, does not
correspond to the example).
[scmesfkt-270514-01_DE, 1, en_US]
Figure 2-2 Connecting Measuring Points and Function Groups
Basic Structure of the Function
2.1 Function Embedding in the Device
SIPROTEC 5, High-Voltage Bay Controller, Manual 37
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
