Siemens 6MD86 - Page 421

Addr. Parameter C Setting Options Default Setting
_:5071:109 Synchrocheck 1:Supervi-
sion time
0.00 s to 60.00 s 0.1 s
Synchr. conditions
_:5071:122 Synchrocheck 1:Max.
voltage diff. V2>V1
0.000 V to 170.000 V 5.000 V
_:5071:123 Synchrocheck 1:Max.
voltage diff. V2<V1
0.000 V to 170.000 V 5.000 V
_:5071:117 Synchrocheck 1:Max.
frequency diff. f2>f1
0.000 Hzto 2.000 Hz 0.100 Hz
_:5071:118 Synchrocheck 1:Max.
frequency diff. f2<f1
0.000 Hzto 2.000 Hz 0.100 Hz
_:5071:124 Synchrocheck 1:Max. angle
diff. α2>α1
0 ° to 90 ° 10 °
_:5071:125 Synchrocheck 1:Max. angle
diff. α2<α1
0 ° to 90 ° 10 °
General
_:5041:1 Sychr./Asycr.1:Mode
•
off
•
on
•
test
off
_:5041:101 Sychr./Asycr.1:Min. oper-
ating limit Vmin
0.300 V to 340.000 V 90.000 V
_:5041:102 Sychr./Asycr.1:Max. operat.
limit Vmax
0.300 V to 340.000 V 110.000 V
_:5041:110 Sychr./Asycr.1:Max.durat.
sync.process
0.00 s to 3600.00 s; ∞ 30.00 s
_:5041:108 Sychr./Asycr.1:Direct close
command
•
no
•
yes
no
_:5041:126 Sychr./Asycr.1:Voltage
adjustment
0.500 to 2.000 1.000
De-en.gized switch.
_:5041:105 Sychr./Asycr.1:Close cmd.
at V1< & V2>
•
no
•
yes
no
_:5041:106 Sychr./Asycr.1:Close cmd.
at V1> & V2<
•
no
•
yes
no
_:5041:107 Sychr./Asycr.1:Close cmd.
at V1< & V2<
•
no
•
yes
no
_:5041:103 Sychr./Asycr.1:V1, V2
without voltage
0.300 V to 170.000 V 5.000 V
_:5041:104 Sychr./Asycr.1:V1, V2 with
voltage
0.300 V to 340.000 V 80.000 V
_:5041:109 Sychr./Asycr.1:Supervision
time
0.00 s to 60.00 s 0.1 s
Asynchr. op.mode
_:5041:114 Sychr./Asycr.1:Async. oper-
ating mode
•
off
•
on
on
_:5041:113 Sychr./Asycr.1:CB make
time
0.01 sto 0.60 s 0.06 s
_:5041:115 Sychr./Asycr.1:Max. voltage
diff. V2>V1
0.000 V to 170.000 V 5.000 V
_:5041:116 Sychr./Asycr.1:Max. voltage
diff. V2<V1
0.000 V to 170.000 V 5.000 V
Control Functions
6.4 Synchronization Function
SIPROTEC 5, High-Voltage Bay Controller, Manual 421
C53000-G5040-C015-9, Edition 11.2017