The Minimum operate time parameter defines the minimum duration for tripping the function. In contrast
to other protection functions, the parameter is set within its own function. As a result, the setting is inde-
pendent of the identically named global parameter that is set in the Device settings.
[lo-bbp-verza-3ph.vsd, 5, en_US]
Figure 7-15 Delay/Tripping of the Circuit-Breaker Failure Protection Function (3-Pole Circuit Breaker)
Protection and Automation Functions
7.1 Circuit-Breaker Failure Protection
SIPROTEC 5, High-Voltage Bay Controller, Manual 527
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
