[scuserrlog1-081217-01, 1, en_US]
Figure 3-12 Reading the User-Defined Log on the On-Site Operation Panel of the Device
Deletability
The user-defined log of your SIPROTEC 5 device can be deleted. You will find details about this in chapter
3.1.6 Saving and Deleting the Logs.
Configuration of a User-Defined Log
The indication capacity of a created user-defined log can be configured freely in the associated column of the
information routing (matrix) of DIGSI 5:
Target → Log → U1 or U2
[scdiu1u2-280415-01, 1, en_US]
Figure 3-13
Indication Configuration in DIGSI 5 (Example: User-Defined Log U1/2)
System Functions
3.1 Indications
62 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
