[sc_LB_GOOSE_2, 1, en_US]
Figure 3-28
Influence Option When Linking a DPC Type Data Object
Depending on the selected data type of the object, various selection options are offered to you for the Safe
state item in the Common settings section. At this point, you select the manually updated values that allow
a safe operating state as soon as the data access via the communication path is disturbed.
•
Select the property for the selected data object.
You can also set the Advanced quality attributes of the data object for GOOSE Later Binding.
The following figure shows the advanced quality attributes using the example of a DPC data type.
•
Open the Properties window and select the Advanced quality attributes sheet.
System Functions
3.3 Processing Quality Attributes
78 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
