01/02
6-59
8825/8830 Printer
8830 Change Tag Information,
General Procedures
8830 Change Tag Information
Introduction
The purpose of this section is to list the Change Tag Index.
All important modifications are identified by a Tag number on a matrix card attached to the
machine.
This section describes all of the Tags as well as multinational applicability, classification codes,
and permanent or temporary modification information.
Classification Codes
A Tag number may be required to identify differences between parts that cannot be inter-
changed, or differences in diagnostic, repair, installation, or adjustment procedures. A Tag
number may also be required to identify the presence of optional hardware, special non-vola-
tile memory programming, or if mandatory modifications have been installed.
Each Tag number is given a classification code to identify the type of change the Tag has
made:
M - Mandatory
N - Not installed in the field
O - Optional
R - Repair
TAG: 1
CLASS: M
USE: All
MFG SERIAL NUMBERS:
NAME: EME enhancements within Assembly 62K7891
PURPOSE: Improves EME emissions.
KIT NUMBER: N/A
REFERENCE:
TAG: 2
CLASS: M
USE: All
MFG SERIAL NUMBERS: US - 8YG060018 and up - - -EO - 110907020-0
NAME: IOT Firmware update
PURPOSE: Updates US Firmware 133K15992 version # 00.32.01-10
Updates EO Firmware 133K16161 version # 00.32.01-10
KIT NUMBER:
REFERENCE:
TAG: 3
CLASS: M
USE: All
MFG SERIAL NUMBERS: US - 8YG060261 - - EO - 110907224-1 and up
NAME: IOT Controller PWBA
PURPOSE: Enabled folder interface
KIT NUMBER: N/A
REFERENCE:
TAG: 4
CLASS: M
USE: All
MFG SERIAL NUMBERS: US - 8YG060120 and up - - EO - 110907064 and up
NAME: IOT Controller PWB
PURPOSE: Updates IOT Firmware US 133K15993 version to 00.33.00-10
Updates IOT Firmware EO 133K16162 version to 00.33.00-10
KIT NUMBER: N/A
REFERENCE:
TAG: 5
CLASS: M
USE: All
MFG SERIAL NUMBERS: US - 8YG060363 and up - -EO -110907119-2 and up
NAME: Support Bracket
PURPOSE: Keeps the power cord from accidentally being disconnected from the printer.
Add Support Bracket to US AC Mod 101K25694
Add Support Bracket to EO AC Mod 101K27783
KIT NUMBER: 600K606610
REFERENCE:
To Next Page
Loading...
Need help?
General