01/02
4-31
8825/8830 Printer
REP 8.9
Repairs and Adjustments
REP 8.9 Fabric Guide
Parts List on PL 10.3
WARNING
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: The art used for this procedure was developed for previous products and may not
match the 8825/8830 configuration exactly.
Removal
1. Lower the Media Transport Cover.
2. (Figure 1): Carefully reach into the Printer and remove the Fabric Guide.
Figure 1 Removing the Fabric Guide
1
Raise the Retaining Bar
90 degrees
2
Remove the
Fabric Guide
To Next Page
Loading...
Need help?
General