Yamaha CS1D - Page 478

Input functions
130
Hint
When the cursor is on a field that is in an editable
state (displayed in light blue), pressing the [ENTER]
switch will have the same result as step 3.
[Procedure]
Using the template name list to assign a name
to a channel/DCA
A name registered in the template name list can be input
directly into the name list. This method is convenient
when you wish to create a name list quickly.
1. Use the two buttons of the LIST SELECT (1) sec-
tion to select the type of item whose name you wish
to change.
2. In the name list, move the cursor to the field whose
name you wish to change, and press the [ENTER]
switch. (Alternatively, use the [CURSOR] switches
to move the cursor to the desired field, and press
the [ENTER] switch.)
The selected line will turn light blue or black.
3. In the template name list, click the name that you
wish to use. (Alternatively, use the [CURSOR]
switches to move the cursor to the desired field, and
press the [ENTER] switch.)
The selected line will turn light blue or black.
4. Click the [√] template copy button (5). (Alterna-
tively, use the [CURSOR] switches to move the cur-
sor to the [√] button in the screen, and press the
[ENTER] switch.) When you do so, both the short
name and long name will be copied from the tem-
plate name list to the name list.
Hint
A name that is already assigned to a channel or DCA
group can also be copied to the template name list. In
this case, click the [®] template copy button in step
4.