Effects Parameters
31
• DELAY + ER. [Type: MIX]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
• DELAY ➔ ER. [Type: MIX]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
DELAY L 0.0 - 4000.0 Left channel delay time
NOTE L *1 Used in conjunction with TEMPO to determine delay time
DELAY R 0.0 - 4000.0 Right channel delay time
NOTE R *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
FB.DELAY 0.0 - 4000.0 Feedback delay time
NOTE FB. *1 Used in conjunction with TEMPO to determine delay time
HI.RATIO 0.1 - 1.0 High-frequency feedback ratio
ER.:DELAY BAL. 0 - 100 [%]
Delay and early reflections balance
(0%= early reflections, 100%= delay)
ER. TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection simulation
ROOM SIZE 0.1 - 20.0 Reflection spacing
LIVENESS 0 - 10 Early reflections decay characteristics (0= dead, 10= live)
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
DENSITY 0 - 100 [%] Reverb density
ER. NUM. 1 - 34 Number of early reflections
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
DELAY L 0.0 - 4000.0 Left channel delay time
NOTE L *1 Used in conjunction with TEMPO to determine delay time
DELAY R 0.0 - 4000.0 Right channel delay time
NOTE R *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
FB.DELAY 0.0 - 4000.0 Feedback delay time
NOTE FB. *1 Used in conjunction with TEMPO to determine delay time
HI.RATIO 0.1 - 1.0 High-frequency feedback ratio
ER.-DELAY BAL. 0 - 100 [%]
Delay and early reflected delay balance
(0% = early reflected delay, 100% = delay)
ER. TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection simulation
ROOM SIZE 0.1 - 20.0 Reflection spacing
LIVENESS 0 - 10 Early reflections decay characteristics (0= dead, 10= live)
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
DENSITY 0 - 100 [%] Reverb density
ER. NUM. 1 - 34 Number of early reflections
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
3
3
3
3
3
3
To Next Page
Loading...
