Appendices
26
• TREMOLO [Type: STEREO]
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
• HQ. PITCH [Type: MIX]
*1
• Delay Time is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE *1
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
WAVE Sine, Tri, Square Modulation waveform
LOW SHEL. F Thru, 21 - 8.0k [Hz] Low-range shelving filter frequency
LOW SHEL. G -12.0 - +12.0 [dB] Low-range shelving filter gain
PEQ F 100 - 8.0k [Hz] Parametric EQ cutoff frequency
PEQ G -12.0 - +12.0 [dB] Parametric EQ gain
PEQ Q 10.0 - 0.1 Parametric EQ Q
HIGH SHEL. F 50 - 16.0k, Thru [Hz] High-range shelving filter frequency
HIGH SHEL. G -12.0 - +12.0 [dB] High-range shelving filter gain
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
delay time
PITCH –12 - +12 Pitch shift
FINE –50 - +50 [ct] Pitch shift fine
MODE 1 - 10 Pitch shift precision
DELAY 0.0 - 1000.0 [ms] Delay time
NOTE *1 Used in conjunction with TEMPO to determine delay time
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
3
3
3
3
3
To Next Page
Loading...
