EasyManua.ls Logo

Yamaha CS1D - Rev + Sympho; Rev Pan

Yamaha CS1D
630 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendices
30
REV SYMPHONIC [Type: MIX]
*1
FREQ. is calculated from the [TEMPO] and [NOTE].
REV PAN [Type: MIX]
*1
FREQ. is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE *1
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
MOD DELAY 0.0 - 500.0 [ms] Delay time applied to modulation
WAVE Sine, Tri Modulation waveform
SYM-REV BAL. 0 - 100 [%]
Reverb and symphonic reverb balance
(0%= symphonic reverb, 100%= reverb)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE *1
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
DIRECTION L<->R, L-->R, L<--R, Turn L, Turn R Panning direction
WAVE Sine, Tri, Square Modulation waveform
PAN-REV BAL. 0 - 100 [%]
Reverb and panned reverb balance
(0%= panned reverb, 100%= reverb)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
  
3
      
3
3
  
3
      

Table of Contents

Other manuals for Yamaha CS1D

Related product manuals