CS1D Reference Manual (Hardware)
56
SELECTED OUTPUT CHANNEL block
[Function]
In this block you can set and view the parameters of the currently selected input channel (MIX channel,
MATRIX channel, L or R channels of STEREO A/B).
Hint
If desired, you can cause the corresponding screen to automatically appear when you operate this block.
This setting is made in the UTILITY function PREFERENCE screen.
COMPRESSOR
Q
EQ ON
EQUALIZER
DCA
SAFE
CHANNEL SELECT
SELECTED OUTPUT CHANNEL
ON
DEC INC
SHIFT
SELECTED OUTPUT
CHANNEL block
To Next Page
Loading...
