B.3 Parameter Table
480 YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
F7: Communication Option Card (SI-EM3 and SI-EN3)
F7-01 through F7-42 are common settings used for Modbus TCP/IP, and Ethernet/IP option cards. Other parameters in
the F7 group are used for communication protocol specific settings.
For more details on a specific option
card, refer to the instruction manual for the option card.
No.(Addr.) Name Description Setting Page
F7-01
(3E5H)
<44> <45>
<46>
IP Address 1
Sets the static/fixed IP address.
Parameter F7-01 sets the most significant octet.
Default: 192
Min: 0
Max: 255
–
F7-02
(3E6H)
<44> <45>
<46>
IP Address 2
Sets the static/fixed IP address.
Parameter F7-02 sets the second most significant octet.
Default: 168
Min: 0
Max: 255
–
F7-03
(3E7H)
<44> <45>
<46>
IP Address 3
Sets the static/fixed IP address.
Parameter F7-03 sets the third most significant octet.
Default: 1
Min: 0
Max: 255
–
F7-04
(3E8H)
<44> <45>
<46>
IP Address 4
Sets the static/fixed IP address.
Parameter F7-04 sets the fourth most significant octet.
Default: 20
Min: 0
Max: 255
–
F7-05
(3E9H)
<46>
Subnet Mask 1
Sets the static/fixed Subnet Mask.
Parameter F7-05 sets the most significant octet.
Default: 255
Min: 0
Max: 255
–
F7-06
(3EAH)
<46>
Subnet Mask 2
Sets the static/fixed Subnet Mask.
Parameter F7-06 sets the second most significant octet.
Default: 255
Min: 0
Max: 255
–
F7-07
(3EBH)
<46>
Subnet Mask 3
Sets the static/fixed Subnet Mask.
Parameter F7-07 sets the third most significant octet.
Default: 255
Min: 0
Max: 255
–
F7-08
(3ECH)
<46>
Subnet Mask 4
Sets the static/fixed Subnet Mask.
Parameter F7-08 sets the fourth most significant octet.
Default: 0
Min: 0
Max: 255
–
F7-09
(3EDH)
<46>
Gateway Address 1
Sets the static/fixed Gateway address.
Parameter F7-09 sets the most significant octet.
Default: 192
Min: 0
Max: 255
–
F7-10
(3EEH)
<46>
Gateway Address 2
Sets the static/fixed Gateway address.
Parameter F7-10 sets the second most significant octet.
Default: 168
Min: 0
Max: 255
–
F7-11
(3EFH)
<46>
Gateway Address 3
Sets the static/fixed Gateway address.
Parameter F7-11 sets the third most significant octet.
Default: 1
Min: 0
Max: 255
–
F7-12
(3F0H)
<46>
Gateway Address 4
Sets the static/fixed Gateway address.
Parameter F7-12 sets the fourth most significant octet.
Default: 1
Min: 0
Max: 255
–
F7-13
(3F1H)
Address Mode at Startup
Selects how the option address is set.
0: Static <45>
1: BOOTP
2: DHCP
Default: 2
Min: 0
Max: 2
–
F7-14
(3F2H)
Duplex Mode Selection
Selects duplex mode setting.
0: Half duplex forced
1: Auto-negotiate duplex mode and communication speed
2: Full duplex forced
3: Half duplex forced (port 1)/Auto-negotiate duplex mode and communication speed (port 2)
4: Half duplex forced (port 1)/Full duplex forced (port 2)
5: Auto-negotiate duplex mode and communication speed (port 1)/Half duplex forced (port 2)
6: Auto-negotiate duplex mode and communication speed (port 1)/Full duplex forced (port 2)
7: Full duplex forced (port 1)/Half duplex forced (port 2)
8: Full duplex forced (port 1)/Auto-negotiate duplex mode and communication speed (port 2)
Default: 1
Min: 0
Max: 8
–
F7-15
(3F3H)
<47>
Communication Speed Selection
Sets the communication speed.
10: 10 Mbps
100: 100 Mbps
101: 10 Mbps (port 1)/100 Mbps (port 2)
102: 100 Mbps (port 1)/10 Mbps (port 2)
Default: 10
Min: 10
Max: 102
–
F7-16
(3F4H)
Communication Loss Time Out
Sets the time-out value for communication loss detection in tenths of a second. A value of 0
disables the connection time-out.
Example: An entered value of 100 represents 10.0 seconds.
Default: 0.0 s
Min: 0.0 s
Max: 30.0 s
233
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
All Modes
To Next Page
Loading...
Need help?
General
