EasyManua.ls Logo

YASKAWA GA700 - Page 311

YASKAWA GA700
1053 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network
Communications
5
5.3 MEMOBUS/Modbus Communications
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 311
Register No.
(Hex.)
Description
0033 Reserved
0034 Product code 1 [ASCII], product type (GA700 =0A)
0035 Product code 2 [ASCII], region
0036 - 0037 Reserved
0038 PID Feedback: Unsigned, input is equivalent to 100%/maximum output frequency (Units:0.1%)
0039 PID Input: Signed, ±100%/±maximum output frequency (Units:0.1%)
003A PID Output: Signed, ±100%/±maximum output frequency (Units:0.1%)
003B - 003C Reserved
003D
Communications error description
Note:
The drive saves the description of the communications error until you reset the fault.
bit 0
CRC Error
bit 1 Data Length Error
bit 2 Reserved
bit 3 Parity Error
bit 4 Overrun Error
bit 5 Framing Error
bit 6 Timeout
bit 7 - F Reserved
003E
Output frequency
Units: min
-1
or r/min
Note:
Set E2-04, E4-04, E5-04, E9-08 [Motor Pole Count].
003F
0.01 % units
0040 - 004A Used with U1-xx [Operation Status Monitors]. Refer to the U Monitor for parameter details.
004B
U1-12 [Drive Status]
bit 0 1: During run
bit 1 1: During zero speed
bit 2 1: During reverse
bit 3 1: During reset signal input
bit 4 1: During speed agreement
bit 5 1: Drive operation ready
bit 6 1: Minor Fault
bit 7 1: Fault
bit 8 1: oPExx [Operation Error] generation
bit 9 1: Recovery from momentary power loss, 0: Power recovery
bit A 1: Motor 2 Selection
bit B Reserved
bit E ComRef status/ NetRef status
bit F ComCtrl status/ NetCtrl status
004C - 007E Use with U1-xx, U4-xx, U5-xx, U6-xx [Monitors]. Refer to U2: Fault Trace and U3: Fault History for details.
007F Minor fault code (Refer to Minor fault description for more information on the minor fault codes.)
0080 - 0097
Use with U2-xx, U3-xx [Monitors]. Refer to U Monitor for details, and refer to Fault Trace/Fault History Descriptions
for details on register values.
0098 - 0099
U4-01 [Cumulative Ope Time]
(Ex.) When U4-01 [Cumulative Ope Time] is 12345, 0098 (Hex.) = 1234 and 0099 (Hex.) = 5.

Table of Contents

Other manuals for YASKAWA GA700

Related product manuals