10.9 F: Options
542 YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
No.
(Hex.)
Name Description
Default
(Range)
Ref.
F7-06
(03EA)
Subnet Mask 2
Sets the second octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
255
(0 - 255)
855
F7-07
(03EB)
Subnet Mask 3
Sets the third octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
255
(0 - 255)
855
F7-08
(03EC)
Subnet Mask 4
Sets the fourth octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
0
(0 - 255)
855
F7-09
(03ED)
Gateway Address 1
Sets the first octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
192
(0 - 255)
855
F7-10
(03EE)
Gateway Address 2
Sets the second octet of the gateway address of the connected
network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
168
(0 - 255)
855
F7-11
(03EF)
Gateway Address 3
Sets the third octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
1
(0 - 255)
855
F7-12
(03F0)
Gateway Address 4
Sets the fourth octet of the gateway address of the connected
network.
Note:
Set this parameter when F7-13 = 0 [Address Mode at Startup =
Static].
1
(0 - 255)
856
F7-13
(03F1)
Address Mode at
Startup
Sets the method to set option card IP addresses.
0 : Static
1 : BOOTP
2 : DHCP
Note:
• The following setting values are available when using the
PROFINET communication option card (SI-EP3).
–0: Static
–2: DCP
• When F7-13 = 0, set parameters F7-01 to F7-12 [IP Address 1
to Gateway Address 4] to set the IP Address. Be sure to set a
different IP address for each drive on the network.
2
(0 - 2)
856
To Next Page
Loading...
