YASKAWA GA700 - Page 619

Parameter List
10
10.18 Parameters that Change from the Default Settings with A1-02 [Control Method Selection]
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual 619
No. Name
Setting
Range
Unit
Control Method (A1-02 Setting)
OLV/PM
(5)
AOLV/PM
(6)
CLV/PM
(7)
EZOLV
(8)
n1-15
PWM Voltage
Offset Calibration
0 - 2 1 1 1 1 1
o1-03
Frequency
Display Unit
Selection
0 - 3 1 0 1 1 1
o1-04
V/f Pattern
Display Unit
0 - 1 1 - 1 1 -
*1 The setting range is 0.0 to 100.0 when A1-02 = 6 or 7 [PM Advanced Open Loop Vector or PM Closed Loop Vector].
*2 The setting range is 0.0 to 40.0 when A1-02 = 6 or 7 [PM Advanced Open Loop Vector or PM Closed Loop Vector].
*3 The default setting varies depending on the setting of C6-01 [Normal / Heavy Duty Selection].
*4 This is the value for 200 V class drives. Double the value for 400 V class drives.
*5 The setting range is -100.0 to +100.0 when A1-02 = 6 or 7 [PM Advanced Open Loop Vector or PM Closed Loop Vector].